Important Tips on How to Clean a Green Swimming Pool

Algae in your pool is a common cause of green pool water. When the free chlorine level in your pool is low, algae blooms may develop. 

You run a higher risk of growing pool algae if you are exposed to extreme heat, a lot of rain, or poor circulation without using a prophylactic algaecide. 

If the correct measures aren’t followed to effectively cure and prevent the issue, stubborn pool algae can be difficult to control. To cure and prevent green pool water, take the following actions.

If you’re like most people, you love spending time in your swimming pool during the hot summer months. But what happens when it starts to get dirty?

Statistics show that swimming is the fifth most popular activity in the US. If you are among the owners living in Las Vegas, keep reading. 

A green swimming pool can be a horror show, but with these tips, you can keep your pool looking crystal clear all season long.

Here are 9 Important Tips on How to Clean a Green Swimming Pool

  1. Test and balance the water.
  2. Remove debris within the pool.
  3. Clean skimmers and put in new nets.
  4. Brush all walls and floors of the pool.
  5. Apply a shock treatment.
  6. Apply algaecide.
  7. Clean the in-built pump filter.
  8. Check the pH level of the water.
  9. Add a flocculant. 

Tip No. 1: Test and Balance the Water

Always start by checking the water in your pool. If your water’s parameters are out of balance, your test results will show you. Keep a close eye on your free chlorine level. 

Your pool’s water may become green if there is a low free chlorine level. Always keep free chlorine levels between 1 and 4 ppm. 

To restore proper sanitizer levels, if necessary, administer the appropriate chlorine and sanitizers.

Tip No. 2: Remove Debris Within the Pool

No matter what time of year it is, debris can always accumulate in swimming pools. 

This can be particularly dangerous for swimmers if not removed promptly, as it can cause slips and falls. 

In addition, without proper removal, debris can also lead to unsightly water stagnation and an increase in the growth of algae and other organisms. 

Fortunately, removing debris from a pool is a quick and easy process that can be done by anyone. All you need is a net!

Tip No. 3: Clean Skimmers and Put in New Nets

The beginning of pool circulation and the entrance to your pool’s filtration system are represented by pool skimmers.

Water is sucked into the skimmers by your pool pump. Larger material that may cause a blockage if it reached your pump or filter is removed from the water as it moves through the skimmer basket.

Additionally, it enables the filter to complete its function of removing tiny impurities, resulting in cleaner water returning through the returns to your pool.

Tip No. 4: Brush All Walls and Floors of the Pool

Brush all of the walls and floor to remove any algae build-up. You can use a brush or broom, whichever you prefer. 

Be sure to get into all of the corners and nooks and crannies to ensure that the algae are completely removed. 

Once you’ve finished brushing, give the pool a final rinse with your garden hose. 

Tip No. 5: Apply a Shock Treatment

The method of shocking involves adding chemicals to your pool, typically chlorine, to separate chloramines, commonly known as mixed chlorine, to swiftly raise your chlorine level and eliminate hazardous germs such as algae.

Applying pool shock is the next step toward crystal clear water. Water filtration is improved and pollutants that could lead to algae growth are removed by shocking your pool.

Tip No. 6: Apply Algaecide

Pool algae can be treated and prevented with algaecides, but not all algaecides are the same. 

Make sure to choose an algaecide that kills green pool algal when treating the water in a green pool. 

Some dead algae may still be present in your pool after treatment. Keep giving the surfaces of your pool a thorough brushing.

Tip No. 7: Clean the In-built Pump Filter

In accordance with your owner’s manual, backwash or chemically clean your filter to get rid of mineral and organic buildup. 

To give your pool’s whole gallon capacity the chance to pass through your clean filter, let the pump and filter run continuously for 24 hours.

Tip No. 8: Check the pH level of the Water

Make sure your water’s pH is at the proper level by checking it. This is crucial because the pH level needs to be right for any chemical to function correctly. 

Before continuing to the next step, make the appropriate modifications if the pH level is off.

Tip No. 9: Add a Floculant

If you’re like most pool owners, you probably think that all you need to do to keep your pool clean is add chlorine every so often. 

However, using a flocculant is also an important part of maintaining your pool’s cleanliness. 

Fill one of the skimmer baskets with flocculant. This product’s purpose is to combine smaller water-borne particles into larger ones so they can be more easily captured in the sand filter.

How long does it take for a pool to clear up from green?

You can completely eliminate all of the algae in your pool in less than 5 days if you use the method described in this article. 

We advise adjusting your pH and alkalinity, adding two or three calcium hypochlorite shocks to the pool at night, and running the filtration system continuously.

Call Clean Living and Pool Spa for the Best Pool Cleaning Services in Las Vegas

Looking for the best pool cleaning services in Las Vegas? Look no further than Call Clean Living and Pool Spa. 

They provide top-quality service at an affordable price and always put their customers first. 

Clean Living & Pool Spa is the only company you’ll need for all your pool needs. With their unmatched honesty and quality, they’ve become a favorite of many people in Los Angeles.

Leave a Reply

Your email address will not be published. Required fields are marked *