Dishwashers are an important part of our lives. It is because the dishwasher makes our lives easier. We just need to place the items inside the machine, and it will do the job for us. We eat on a daily basis, and every day we need to clean the dishes, and everyday people use the dishwasher and today I will explain how to unclog a dishwasher?.
Just as in the case of the washing machine, there can also be a clogging problem with the dishwasher too. When you are done with the washing of dishes, then you need to clean the drains too so that you can avoid the problem of clogging. When you are facing this problem, then you do not have to use different items for this purpose. Your problem can be solved within a few steps, which we will see today. Here we will see how to unclog a dishwasher.
Table of Contents
How to unclog a dishwasher?
Here we will see a few steps through which we can easily unclog the blocked vessels of a dishwasher. Now you can carry the whole procedure on your own without the assistance of some expert.
Step 1: Empty the dishwasher:
The first step that comes is to empty the whole dishwasher. If you have the dirty plates already inside the dishwasher, then you need to remove them and stack them somewhere else in the kitchen. It is because you need some space inside the dishwasher to clean up the mess. If the plates are there, then there will be favorable chances that the plates might break. Our main focus is on the drainpipe because the water is gathering at that point. So, remove the lower part, also known as the dish rack, out so that you have some more space to work and easily access the drainpipe.
Step 2: No electricity supply should be given to the dishwasher:
Well, this is another important point to be noted. We have to access the inside of the dishwasher directly. For this purpose, the electricity should be cut off from the supply. If the electricity is connected, then there are favorable chances that you can get in contact with the electricity, and that can be dangerous. So, that will be a safety precaution to cut off the electricity supply, and after that, you can continue with the operation of unclogging the dishwasher.
Step 3: Evacuate the standing water:
After you are done with the first two steps, then you have to go for the third one. It involves the removal of the water that is standing there. Like when we are going through the removal of water from the fridge just like the same, we have to go through the same process. Evacuating the standing water is important because that could be the main reason for clogging. So, after cutting off the supply from the electricity, you have to go for the evacuation of water.
Step 4: Checking the drainpipe:
When you are using the dishwasher, then the drainpipe is the most used item by the product. When you put the plates for the cleaning process, then there can be favorable chances that some of the particles went into the drainpipe. If not the food particles, then other things and garbage can also go into the drainpipe. That will be really bad for the How to Unclog a Dishwasher. So, there can be chances that the drainpipe is properly blocked. For this, what you need to do is to take out the entire drainpipe and clean all the particles. The main problem is always hidden inside the drainpipe. So, just take out the entire drainpipe for further steps.
Step 5: Remove drainpipe and clean:
Now when you have detached the drainpipe, then you have to go through the cleaning process. The cleaning process may be a little difficult. When you have to go through the cleaning process, then you have to clean that to the core. There can be different dust particles there, so you have to use the warm water and the detergent too so that you can clean that. You have to ensure that the whole drainpipe is completely clean. Now when you are done with the cleaning, then you can check that if the drainpipe if fully clear or not. Just run the through, and if the water is flowing continuously, then your work is done. Your drainpipe is perfectly fine now, and you are very much near the unclogging the dishwasher.
Step 6: Rejoining to the dishwasher and checking the water flow:
Now you are done with the cleaning process, you have also checked the water flow too. Now you have to attach the drainpipe with the dishwasher. After you are done with the attaching of the drainpipe with the dishwasher, then what you need to do is run the dishwasher and check the water flow again. Put some plates that you have stacked somewhere in the kitchen inside the dishwasher. Now supply the electricity to the dishwasher.
Now run the whole process and see whether the dishwasher is working perfectly or not. If you observe that there is still a little bit of disturbance, but it is working better than it was, then you need to repeat all the process again. But if the problem stands at the same place, then you need to call some expert because there is some other problem that we cannot solve. So, the expert in this one will help. But in most of the cases, the problem of clogging is solved when you follow the following steps.
Step 7: The dishwasher has other problems:
When you have a dishwasher, then you can face different problems. But before you call the expert one in the field, you can go through some of the procedures on your own and can fix the problem yourself. You will call some experts, and that will cost you.
Step 8: Cleaning the garbage:
There can be some chance that the garbage is stuck. The garbage can be over the drain, and therefore there can be a problem of that. So, you need to take out all the dishes and then clean the water that is standing there. After that, you need to clean the garbage that is standing there.
In many conditions, the problem is solved by cleaning the garbage that is stuck there. Before calling an expert to clean that garbage, you need to check that on your own. You can save money from this side by doing the task on your own.
Step 9: There can be enough space for the air:
You could have an air gap built at your sink’s surface next to a hull, depending on the design of your kitchen. It is the protruding cylindrical look that every time you run the dishwasher makes gurgling noises. However, food is often caught in the pipes between your sink cleaner, waste disposal, and washing machine. In order to clear the air gap, the outside air gap must be eliminated. A white tube with a cap can be seen on the top of it. What you need to do is to remove the tube and then clean all the particles, and thus there will be enough space for the air now. Now again, join the pipe with the dishwasher, and you are good to go.
Step 10: Avoid from the future clogging:
Now when you are done with the steps to How to Unclog a Dishwasher. Now you can follow the other steps too in order to prevent the condition of clogging again.
Step 11: Rinsing with the hot water:
If you want to last for years to come, it makes no sense to place undue pressure on your dishwasher and its philters. You should ensure that you do not wash your meals twice until you stack them in the How to Unclog a Dishwasher that most of your meals are washed off. This means your basin is free of debris and much of your philter stays clean. Pay attention to the disposal of rigid objects or hard food. It would be best if you did not have to bring in your garbage disposal items such as peach pits, lemon seeds, popcorn kernels, or chicken bones. These small hard objects may be flushed by the disposal drain and jammed in the tube, connecting the sink with the dishwasher.
Step 12: Cleaning the filter on a daily basis:
When you are cleaning on a regular basis, then there can be many chances that the filter might get dirty with the food particles and the other things. So, it will be a great idea if you do this activity on a daily basis. When you are done with the cleaning of the plates, then you need to take the filter out and then clean it. Cleaning it will lessen the chances of clogging. The plates will be washed a day thrice. So, you can easily do the task at night to clean the filter. This is one of the steps to avoid the condition of clogging.